Honda CBR125R, Owner'S Manual

Page: 398 / 430

LIGHTS/METERS/SWITCHES
19-6
REAR
Remove the following:
– Rear cowl (page 2-5)
– Brake/tail light (page 19-6)
Disconnect the turn signal light connectors.
Remove the turn signal light mounting nut and turn
signal light.
Install the turn signal light in the reverse order of
removal.
BRAKE/TAIL LIGHT
BULB REPLACEMENT
Remove the pillion seat (page 2-4).
Remove the bolt.
Release the brake/tail light assembly bosses from
the rear fender grommets.
Disconnect the brake/tail light 3P (Natural) connec-
tor and remove the brake/tail light.
Turn the bulb socket counterclockwise and remove
it.
While pushing in the bulb, turn it counterclockwise
to remove it.
Replace the bulb with a new one.
Install the removed parts in the reverse order of
removal.
CONNECTORS
properly (page 1-
18).
TORQUE:
Turn signal light mounting nut:
8.8 N·m (0.9 kgf·m, 6.5 lbf·ft)
NUT
TURN SIGNAL LIGHT
BRAKE/TAIL LIGHT ASSEMBLY
GROMMET
BOLT 3P (NATURAL)
CONNECTOR
BOSS
SOCKET BULB
Route the wire