Rear Seat
#
Removal
1.
Insert the ignition key into the seat lock.
2.
Turn it clockwise, then pull the rear seat
up and back.
#
Installation
1.
Insert the front prongs into the front stays
on the frame.
2.
Push and down on the rear of the rear
seat until it locks in place.
Make sure that the seat is locked securely
in position by pulling it up lightly.
The seat locks automatically when closed.
Take care not to lock your key in the
compartment under the rear seat.
20171012170126_32K98B000_eng_BOOK Page 81 Thursday, October 12 2017 17:09:26 JST
Removing & Installing Body Components
u
Rear Seat
Maintenance
78
Rear seat
Ignition
key
Seat lock
Front stays
Front prongs
