Electrical Trouble
u
Burned-out Light Bulb
87
continued
Tr
ou
bles
hoo
ting
1.
Remove the rubber plug.
2.
Remove the front visor by removing the
screws.
3.
Pull the position light socket and remove
it.
4.
Disconnect the headlight connector.
5.
Remove the dust cover.
6.
Unhook the pin and remove the bulb.
7.
Install a new bulb and parts in the reverse
order of removal.
u
Install the dust cover with its TOP mark
facing up.
Do not touch the glass surface with your
fingers. If you touch the bulb with your bare
hands, clean it with a cloth moistened with
alcohol.
CB125 III KE
Front visor
Position light
socket
Headlight connector
Rubber
plug
Screws
Dust
cover
Bulb
Pin
TOP mark
15 CGX125SH (KE)-32K52D000.book 87 ページ 2015年8月5日 水曜日 午後1時26分