−
−
−
65
STARTING THE ENGINE (H type)
If it does not turn on, stop the engine
and perform the following
inspections.
Before leaving the dock, check the
operation of the emergency stop
switch.
In an area where the temperature
goes down below 0°C (32°F), the
engine cooling system may freeze.
High speed operation without
proper engine warm up may
damage the engine.
Failure to completely warm up the
engine will result in poor engine
performance.
Above 5°C (41°F)
run the engine
for 2 or 3 minutes.
Warm up the engine as follows:
If the oil level is normal and the oil
pressure indicator light does not
turn ON, consult with an
authorized Honda outboard motor
dealer.
Check the oil level (see page
).
Below 5°C (41°F)
run the engine
for at least 5 minutes at
2,000 min (rpm)
3,000 min
(rpm).
2)
1)
50
10.
11/09/05 18:06:10 32ZY0620_065
Summary of Contents for BF10D
