Honda BC4050, Operator'S Manual, Page: 8 / 30

ASSEMBLY
BAGGER CART
Cart Assembly
2. Install the wheel assemblies on the frame,
using eight
3/8
x 1 inch hex bolts, eight
3/8
inch
flat washers, and eight 3/8 inch
lock
nuts.
Tighten the nuts and bolts securely.
Lubricate the wheels with multi-purpose
grease. Grease fittings are located at the axles
and at the swivel pivots.
Inflate the tires to 30 psi (207
x
1 inch HEX BOLT (8)
inch
LOCK NUT
(8)
3. Install the U-bracket on the cart bed, using
three 5/16
x 3/4
inch pan-head screws, three
5/16 inch flat washers, three 5/16 inch lock
washers, and three 6 inch nuts.
Tighten the nuts and Screws securely.
5116
314
5/16 Inch
WASHER
(3)
5/16 inch NUT
(3)
4.
Turn the cart bed upside down. Install the
frame on the U-bracket, using
two 1/2 x 1-1/4
inch hex bolts and two 1/2 inch
lock
nuts.
Tighten the nuts and bolts securely.
NOTICE
Overtightening the nuts and bolts will bend the
frame brackets in which the U-bracket pivots.
5.
1-114 Inch
HEX BOLT
(2)
Turn the cart bed right side up. Install the latch
handle, using one 5/16 x
1 inch hex bolt,
two 5/16 inch spring washers, two
6
inch flat
washers, and one 5/16 inch lock nut with nylon
insert.
When installing the hardware, position the
spring washers
so
the concave sides face
toward the cart box, and the convex, serrated
sides face away from the cart box.
Tighten the nut and bolt to apply enough
pressure that the latch handle will stay in any
position you move it to.
LATCH HANDLE x
Inch
HEX BOLT
5/16 inch
SPRING WASHERS
6 inch LOCK NUT
(nylon insert)