Honda ANF125, Owner'S Manual, Page: 119 / 520

Avoid cleaning products that are not
specifically designed for motorcycle or
automobile surfaces.
They may contain harsh detergents or
chemical solvents that could damage the
metal, paint, and plastic on your motorcycle.
If your motorcycle is still warm from recent
operation, give the engine and exhaust
system time to cool off.
We recommend avoiding the use of high
pressure water spray (typical in coin-
operated car washes).
Rinse the motorcycle thoroughly with
cool water to remove loose dirt.
Clean the motorcycle with a sponge or
soft cloth using cool water.
Avoid directing water to muffler outlets
and electrical parts.
Clean the plastic parts using a cloth or
sponge dampened with a solution of mild
detergent and water. Rub the soiled area
gently rinsing it frequently with fresh
water.
Take care to keep brake fluid or chemical
solvents off the motorcycle.
They will damage the plastic and painted
surfaces.
The inside of the headlight lens may be
clouded immediately after washing the
motorcycle. Moisture condensation inside
the headlight lens will disappear gradually
by lighting the headlight in high beam. Run
the engine while keeping the headlight on.
High pressure water (or air) can damage
certain parts of the motorcycle.
Clean your motorcycle regularly to protect
the surface finishes and inspect for damage,
wear, and oil or brake fluid leakage.
1.
2.
3.
CLEANING
Washing the Motorcycle
109
09/07/16 14:34:06 32KZFB00_119
http://
mototh.com