uu
When Driving
u
Vehicle Stability Assist (VSA
®
), aka Electronic Stability Control (ESC), System
334
Driving
This button is on the driver side control panel.
This button is used to change VSA
®
modes.
See below for more information.
VSA
®
is turned on every time you turn the
power system on, even if you press the button
the last time you drove the vehicle.
■
When the IDS mode is in QUIET mode, SPORT mode, or SPORT+ mode
To enter
Stuck Vehicle Assist
mode, press
the VSA
®
OFF button until a single beep is
heard and the VSA
®
OFF
indicator illuminates.
u
This message appears on the driver
information interface for a few seconds.
If the IDS mode is changed, VSA
®
will remain
in
Stuck Vehicle Assist
mode.
To exit
Stuck Vehicle Assist
mode, press the
VSA
®
OFF button until a single beep is heard
and the VSA
®
OFF
indicator extinguishes.
■
VSA
®
OFF Button
1
), aka Electronic Stability Control
In
Stuck Vehicle Assist
mode, your vehicle will have
normal braking and cornering ability, but VSA
®
traction and stability enhancement becomes less
effective.
In certain unusual conditions when your vehicle gets
stuck in shallow mud or fresh snow, it may be easier
to free it with
Stuck Vehicle Assist
mode.
In
Stuck Vehicle Assist
mode, the traction control
function becomes less effective. This allows for the
wheels to spin more freely at low speed. You should
only attempt to free your vehicle with the
button
pressed if you are not able to free it without.
Immediately after freeing your vehicle, be sure to
press the button again. We do not recommend
driving your vehicle with
Stuck Vehicle Assist
mode.
You may hear a motor sound coming from the front
of the vehicle while system checks are being
performed immediately after turning the power
system on or while driving. This is normal.
VSA
®
OFF
Indicator
17 NSX-31T6N6000.book 334 ページ 2016年4月22日 金曜日 午後3時44分