435
uu
Jump Starting
u
Han
d
lin
g the U
n
expected
6.
Connect the other end of the second
jumper cable to the front frame as shown.
Do not connect this jumper cable to any
other part.
7.
If your vehicle is connected to another
vehicle, start the assisting vehicle’s engine
and increase its rpm slightly.
8.
Attempt to start your vehicle’s engine. If it
turns over slowly, check that the jumper
cables have good metal-to-metal contact.
Once your vehicle’s engine has started, remove the jumper cables in the following
order.
1.
Disconnect the jumper cable from your vehicle’s ground.
2.
Disconnect the other end of the jumper cable from the booster battery
-
terminal.
3.
Disconnect the jumper cable from your vehicle’s 12-volt battery
+
terminal.
4.
Disconnect the other end of the jumper cable from the booster battery
+
terminal.
Have your vehicle inspected by a nearby service station or an authorized Acura NSX
dealer.
■
What to Do After the Engine Starts
17 NSX-31T6N6000.book 435 ページ 2016年4月22日 金曜日 午後3時44分