−
−
If either front
window senses any obstacle while it
is closing automatically, it will
reverse direction and then stop. To
close the window, remove the
obstacle, then use the window switch
again.
Auto reverse stops sensing when the
window is almost closed. You should
always check that all passengers and
objects are away from the window
before closing it.
The driver’s window auto
reverse function is disabled when
you continuously pull up the switch.
When you push the main switch in,
the indicator comes on and the
passengers’ windows cannot be
raised or lowered. Use the main
switch when you have children in the
vehicle so they do not injure
themselves by operating the
windows unintentionally. To cancel
this feature, push on the switch
again. The switch will pop out and
the indicator will go off.
The windows and the main switch
feature will operate for up to 10
minutes after you turn off the
ignition switch. Opening either front
door cancels this function.
To open either front
window fully, push the window
switch firmly down to the second
detent, then release it. The window
automatically goes down all the way.
To stop the window from going all
the way down, pull back on the
window switch briefly.
To close either front window fully,
pull back the window switch firmly
to the second detent, then release it.
The window automatically goes all
the way up. To stop the window from
going all the way up, push down on
the window switch briefly.
AUTO REVERSE
AUTO
Power Windows
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
107
NOTE:
10/08/27 14:28:09 31TP6610_112
2011 Accord Crosstour
