Honda Accord 2018, Owner'S Manual

Page: 208 / 719

uu Operating the Switches Around the Steering Wheel u Driving Position Memory System *
206
Co
ntrols
1. Set the power mode to ON. Adjust the
driver’s seat to the desired position.
2. Press the SET button.
u You will hear the beeper, and the
memory button indicator light will blink.
3. Press the memory button
( 1
or
( 2
within
five seconds of pressing the SET button.
u Once the seat position has been
memorized, the indicator light on the
button you pressed stays on and you will
hear two beeps.
1. Put the transmission into
( P
.
2. Apply the parking brake.
3. Press a memory button ( ( 1 or ( 2 ).
u You will hear a beep, and the indicator
light will blink.
The seat will automatically move to the
memorized position. When it has finished
moving, you will hear a beep, and the
indicator light stays on.
■
Storing a Position in Memory
1 Storing a Position in Memory
After you press the SET button, the storing operation
will be canceled when:
•
You do not press the memory button within five
seconds.
•
You readjust the seat position before the two
beeps.
•
You set the power mode to any position except
ON.
Memory
Button 1
Memory
Button 2
SET Button
■
Recalling the Stored Position
1 Recalling the Stored Position
The seat will stop moving if:
•
The vehicle speed is above 2 mph (3 km/h).
•
You press the SET button or memory button ( 1 or
( 2 .
•
You adjust the seat position.
Memory
Button 1
Memory
Button 2