31
30
HOMELINK
®
Program your vehicle to operate up to three remote-controlled devices around your
home, such as garage doors, lighting, or home security systems.
Press and hold
the button on the
remote and the HomeLink button at
the same time. Then, while
continuing to hold the HomeLink
button,
press and release
the button
on the remote every 2 seconds.
Does the LED blink at a faster rate within 20
seconds?
Press and hold
the HomeLink
button again.
Training
complete
YES
NO
HomeLink indicator
flashes for 2 seconds,
then remains on.
HomeLink LED
remains on.
YES
NO
YES
NO
Position the remote transmitter you
wish to link 1–3 inches from the
HomeLink button you want to program.
1
Press and hold
the desired
HomeLink button and the button on
the remote transmitter.
Does the HomeLink indicator (LED) blink at a
faster rate after about 10 seconds?
2
a
The remote has a rolling code.
Press
the “learn” button on the
remote-controlled device (e.g.,
garage door opener).
Press
the programmed HomeLink
button again; the remote-controlled
device should operate.
Within 30 seconds,
press and
hold
the programmed HomeLink
button for 2 seconds.
a
Press and hold
the programmed
HomeLink button for about a
second.
Does the device (garage door opener) work?
3
b
4
5
Training a Button
If you have any problems programming HomeLink, see the owner’s manual included
with the device you are trying to program, call HomeLink at (800) 355-3515, or
visit
www.homelink.com
.
PARKING SENSOR SYSTEM
Warns you of the proximity between your vehicle and nearby surrounding objects
when parking or backing up.
How It Works
Turning the System On and Off
Corner sensors
Rear center sensors
Within about 2 ft.
Within about 3.5 ft.
When the system senses an object, an indicator appears on the MID and center display
screen and a beep sounds. As you get closer to the object, the beep rate increases.
Press
the parking sensor
button. A light appears
when the system is on.
13 Pilot TRG_TOURING_ATG_NEW STYLE 8/8/2012 3:50 PM Page 17
