Honda 2012 Ridgeline Owner'S Manual Download Page 148

Page: 148 / 430

Pull up the vanity mirror cover to use
it.

The light comes on when you pull up
the cover.

The light will not come on if the sun
visor is slid outward.

Make sure you put the sun visor
back in place when you are getting
into or out of the vehicle.

In this position, the sun visor can be
adjusted by moving it on its slider.
Do not use the extended sun visor
over the inside mirror.

To use the sun visor, pull it down.
When using the sun visor for the
side window, remove the support rod
from the clip, and swing it out.

Sun Visor

Vanity Mirror

Interior Convenience Items

140

SUN VISOR

Slide

11/09/14 17:51:02 31SJC660_147

Summary of Contents for 2012 Ridgeline















































































































































































































































































































































































































































Search results

Summary of Contents for 2012 Ridgeline

Reviews:

Related manuals for 2012 Ridgeline

Brands by name

Popular brands

Honda 2012 Ridgeline, Owner'S Manual

Search results

Summary of Contents for 2012 Ridgeline

Reviews:

Related manuals for 2012 Ridgeline

Brands by name

Popular brands