196
uu
Audio System
u
Audio System Theft Protection
*
Features
Audio System Theft Protection
*
The audio system is disabled when it is disconnected from the power source, such as
when the battery is disconnected or goes dead.
■
Reactivating the audio system
1.
Turn the ignition switch to ON
(
w
, and turn on the audio system.
u
If you turn the ignition switch to ACCESSORY
(
q
, you will be requested to
enter the audio security code. See step 3.
2.
Press and hold the power volume knob again for more than two seconds.
u
The audio system is reactivated when the system’s control unit recognizes that
the system is in your vehicle.
If the control unit fails to recognize,
ENTER CODE
appears on the audio/
information screen.
3.
Enter the audio security code using the preset buttons. If you enter an incorrect
digit, continue to the last digit, then try again. If you do not enter the code
correctly after 10 tries, leave the system for one hour before trying again, or visit
a dealer to have the system reset.
1
Find the audio system's security code and serial
number label in your owner’s manual kit.
We recommend that you write down the serial
number in this owner’s manual.
Do not store the label in your vehicle. If you lose the
label, you must first retrieve the serial number, and
then obtain the code.
You can find out about your serial number and
security code from a dealer.
You can register the security code at Owner Link
(
owners.honda.com.
), and find information on how
to retrieve the serial number and obtain the code at
radio-navicode.honda.com
.
U.S. models
* Not available on all models
12 US ODYSSEY Revision-31TK86102.book 196 ページ ２０１５年１０月８日 木曜日 午前１１時４７分
