Honda 2012 ACCORD COUPE Owner'S Manual Download Page 121

Page: 121 / 454

Each socket is intended to supply
power for 12 volt DC accessories
that are rated 120 watts or less (10
amps).

Your vehicle has two accessory
power sockets; one is at the front of
the center console and the other is in
the console compartment.

To use an accessory power socket,
the ignition switch must be in the
ACCESSORY (I) or ON (II) position.

None of the sockets will power an
automotive type cigarette lighter
element.

Make sure to put the socket cover
back in place to prevent any small
foreign objects from getting into the
socket.

Interior Convenience Items

Accessory Power Sockets

118

FRONT

CONSOLE COMPARTMENT

2012 Accord Coupe

Inst

nt
s

Cont

Summary of Contents for 2012 ACCORD COUPE







































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 ACCORD COUPE

Reviews:

Related manuals for 2012 ACCORD COUPE

Brands by name

Popular brands

Honda 2012 ACCORD COUPE, Owner'S Manual

Search results

Summary of Contents for 2012 ACCORD COUPE

Reviews:

Related manuals for 2012 ACCORD COUPE

Brands by name

Popular brands