Honda 2010 Civic Coupe, Owner'S Manual

Page: 65 / 402

This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position. If it comes on at any other
time, there is a problem with the
ABS. If this happens, have your
vehicle checked at a dealer. With
this indicator on, your vehicle still
has normal braking ability but no
anti-lock function. For more
information, see page
.
When you press the hazard warning
button, both turn signal indicators
and all turn signals on the outside of
the vehicle flash.
The left or right turn signal indicator
blinks when you signal a lane change
or turn. If an indicator does not blink
or blinks rapidly, it usually means
one of the turn signal bulbs is
burned out (see pages
and ).
Replace the bulb as soon as possible,
since other drivers cannot see that
you are signaling.
This indicator comes on briefly when
you turn the ignition switch to the
ON (II) position. It will then go off if
you have inserted a properly coded
ignition key. If it is not a properly
coded key, the indicator will blink,
and the engine’s fuel system will be
disabled (see page
). 78
280
315 316
Instrument Panel Indicators
Anti-lock Brake System
(ABS) Indicator
Turn Signal and Hazard Warning
Indicators
Immobilizer System
Indicator
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
59
09/07/07 13:59:05 31SVA640_064