Honda 2010 Accord Coupe Owner'S Manual Download Page 96

Page: 96 / 410

To protect items in the trunk when
you need to give the key to someone
else:

To close the trunk, press down on
the trunk lid.

You can open the trunk in two ways:

Pull up on the trunk release lever
to the left of the driver’s seat.

Press and hold the trunk release
button on the remote transmitter.

Keep the trunk lid closed at all times
while driving to avoid damaging the
lid, and to prevent exhaust gas from
getting into the interior. See

on page

Lock the trunk release lever with
the master key.

Give the person the valet key.

Trunk

Carbon

Monoxide Hazard

Pull

TRUNK RELEASE LEVER

MASTER KEY

Summary of Contents for 2010 Accord Coupe



























































































































































































































































































































































































































Search results

Summary of Contents for 2010 Accord Coupe

Reviews:

Related manuals for 2010 Accord Coupe

Brands by name

Popular brands

Honda 2010 Accord Coupe, Owner'S Manual

Search results

Summary of Contents for 2010 Accord Coupe

Reviews:

Related manuals for 2010 Accord Coupe

Brands by name

Popular brands