Honda 2009 Fit, Owner'S Manual

Page: 446 / 597

445
uu When Driving u Adjusting Headlight Distribution
Driving
Adjusting Headlight Distribution
Driving the right-hand type vehicle in right-hand traffic, or the left-hand type vehicle
in left-hand traffic causes headlight glare to oncoming vehicles. You need to alter
the headlight beam distribution using masking tape.
1. Prepare for two rectangular pieces of masking tape, measuring 24 mm (0.9 in)
wide and 113 mm (4.4 in) long, and 28 mm (1.1 in) wide and 143 mm (5.6 in)
long.
u Use masking tape that can shut out light, such as seal type waterproof vinyl.
2. Affix the tape to the lens as shown.
u The label is inclined downward at 19°.
1 Adjusting Headlight Distribution
Be careful not to adhere the tape to an incorrect
location. If the headlight beam is distributed
incorrectly, it may not comply with your country’s
legal requirements. Ask your dealer for details.
Centre point
Centre point
Right-hand drive type vehicle Left-hand drive type vehicle
Centre point
Centre point
19°
19°
19°
19°
143
mm
(5.6
in)
20 mm
(0.8 in)
8 mm (0.3 in)
8 mm
(0.3 in)
20 mm
(0.8 in)
143 m
m (5.6
in)
12 mm
(0.5 in)
108
mm
(4.
3 in
)
5 mm (0.2 in)
12 mm
(0.5 in)
12 mm
(0.5 in)
108 m
m (4.3
in)
5 mm (0.2 in)
12 mm
(0.5 in)
16 FIT JAZZ -32T5A6000.book 445 ページ ２０１５年８月１９日 水曜日 午後１時３８分