Honda 2008 Accord Sedan Owner'S Manual Download Page 84

Page: 84 / 420

CONTINUED

Locks all doors when the shift lever is
moved out of the Park (P) position (A/T
vehicles only).

Make sure the shift lever is in the
Park (P) position (A/T vehicles).

Turn the ignition switch to the ON
(II) position, and open the driver’s
door.

Push and hold the front of the
master door lock switch on the
driver’s door until you hear a click
(after about 5 seconds).

Release the switch, and within 5
seconds, turn the ignition switch
to the LOCK (0) position.

Make sure the shift lever is in the
Park (P) position.

Turn the ignition switch to the ON
(II) position, and make sure to
close the driver’s door.

Door Locks

To program the Park Lock mode:

To turn of f the Auto Door Lock
modes:

Inst

nt
s

Cont

０７／０６／１５１１：１９：４８３１ＴＡ０６００００８６

2008 Accord Sedan

Summary of Contents for 2008 Accord Sedan





































































































































































































































































































































































































































Search results

Summary of Contents for 2008 Accord Sedan

Reviews:

Brands by name

Popular brands

Honda 2008 Accord Sedan, Owner'S Manual

Search results

Summary of Contents for 2008 Accord Sedan

Reviews:

Brands by name

Popular brands