Honda 2007 RDX Owner'S Manual Download Page 327

Page: 327 / 444

The lights and brakes on your
vehicle and the trailer are working
properly.

When preparing to tow, and before
driving away, be sure to check the
following:

The trailer has been properly
serviced and is in good condition.

All weights and loads are within
limits.

The hitch, safety chains, and any
other attachments are secure.

All items in or on the trailer are
properly secured and cannot shift
while you drive.

Your vehicle tires and spare are
properly inflated, and the trailer
tires and spare are inflated as
recommended by the trailer
maker.

You may want to fill the fuel tank
with premium fuel. Premium fuel
provides improved performance.

The vehicle has been properly
serviced, and the suspension,
cooling system, and lights are in
good operating condition.

Pre-Tow Checklist

Towing a Trailer

riv

ing

321

０６／０５／１９１５：００：０２３１ＳＴＫ６０００３２６

Summary of Contents for 2007 RDX





























































































































































































































































































































































































































































Search results

Summary of Contents for 2007 RDX

Reviews:

Related manuals for 2007 RDX

Brands by name

Popular brands

Honda 2007 RDX, Owner'S Manual

Search results

Summary of Contents for 2007 RDX

Reviews:

Related manuals for 2007 RDX

Brands by name

Popular brands