(2)
(3)
(1)
(1) oil filler cap/dipstick
(2) upper level mark
(3) lower level mark
RIGHT SIDE
63
Checking & Adding Oil
Engine Oil
Servicing Your Honda
Park your motorcycle on a firm, level
surface.
Clean around the oil filler cap/dipstick ( )
and nearby surfaces.
Start the engine and let it idle for 3-5
minutes. Stop the engine. Wait 2-3 minutes.
Immediately unscrew and remove the oil
filler cap/dipstick. Wipe it clean.
Hold the motorcycle upright.
If the oil is at or near the upper level mark
( ), you do not have to add oil.
If the oil is below or near the lower level
mark ( ), add the recommended oil until
it reaches the upper level mark. (Do not
overfill.)
Insert the oil filler cap/dipstick until it seats,
but do not screw it in.
Remove the oil filler cap/dipstick and check
the oil level.
Insert the oil filler cap/dipstick and screw it
in tightly.
Check for oil leaks.
1.
2.
1
3.
4.
5.
6.
7.
3
2
8.
9.
05/03/18 15:53:34 31KSJ620_072
