Examine the new wiper blades. If
they have no plastic or metal
reinforcement along the back
edge, remove the metal
reinforcement strips from the old
wiper blade, and install them in
the slots along the edge of the new
blade.
Disconnect the blade assembly
from the wiper arm:
Press and hold the lock tab.
Slide the blade assembly toward
the lock tab until it releases
from the wiper arm.
When replacing a wiper blade,
make sure not to drop the wiper
blade or wiper arm down on the
windshield.
Remove the blade from the blade
assembly:
Find the side of the blade
labeled ‘‘LOCK.’’ This is the side
you pull out.
Pull back the end of the blade
assembly on the ‘‘LOCK’’ side of
the blade. Then grab the end of
the blade, and slide it out.
3.
4.
5.
Wiper Blades
206
BLADE ASSEMBLY
TAB
WIPER BLADE
REINFORCEMENT
STRIP
05/09/09 18:24:03 31SNC600 0209