If your seat belts get dirty, use a soft
brush with a mixture of mild soap
and warm water to clean them. Do
not use bleach, dye, or cleaning
solvents. Let the belts air-dry before
you use the vehicle.
Reinstall the cover, and tighten its
holding clips securely.
Reinstall the socket. Turn it
clockwise until it locks. Make sure
the new bulb is working.
Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
Open the trunk, then remove the
holding clips from the cover, and
remove the cover.
Remove the socket from the light
assembly by turning it one-quarter
turn counterclockwise.
2.
1.
3.
4.
5.
CONTINUED
On DX and LX models
Replacing a High-mount Brake
Light Bulb
Cleaning the Seat Belts
Lights, Cleaning the Seat Belts
Ma
int
e
na
nce
237
SOCKET
BULB
LOOP
０５／０８／０２ １５：１０：２４ ３１ＳＶＡ６００ ０２４０
Summary of Contents for 2005 Civic 2 Door
