CONTINUED
Place the jack under the jacking
point nearest the tire you need to
change. Turn the end bracket
clockwise until the top of the jack
contacts the jacking point. Make
sure the jacking point tab is
resting in the jack notch.
Remove the wheel nuts, then
remove the flat tire. Handle the
wheel nuts carefully; they may be
hot from driving. Place the flat tire
on the ground with the outside
surface facing up.
Do not attempt to forcibly pry the
wheel cover off with a screwdriver or
other tool. The wheel cover cannot
be removed without first removing
the wheel nuts.
Use the extension and the wheel
nut wrench as shown to raise the
vehicle until the flat tire is off the
ground.
9.
10.
11.
On LX and LX-V6 models
Changing a Flat Tire
T
a
k
ing
Ca
re
of
th
e
U
ne
x
p
e
c
te
d
251
JACKING POINT
WHEEL COVER
WHEEL NUTS
WHEEL NUT WRENCH
EXTENSION
０４／０８／０５ １１：１７：３７ ３１ＳＤＰ６２０ ０２５４
