Honda 2004 RSX Owner'S Manual Download Page 65

Page: 65 / 250

Make sure the rear window is clear
and you have good visibility before
starting to drive.

The defogger wires on the inside of
the rear window can be accidentally
damaged. When cleaning the glass,
always wipe side-to-side.

Make any steering wheel adjustment
before you start driving.

To adjust the steering wheel upward
or downward:

Push the lever under the steering
column all the way down.

See page

for important safety

information about how to properly
position the steering wheel.

Rear Window Defogger, Steering Wheel Adjustment

Steering Wheel Adjustment

Instruments and Controls

Adjusting the steering wheel
position while driving may
cause you to lose control of the
vehicle and be seriously injured
in a crash.

Adjust the steering wheel only
when the vehicle is stopped.

Summary of Contents for 2004 RSX



























































































































































































































































Search results

Summary of Contents for 2004 RSX

Reviews:

Related manuals for 2004 RSX

Brands by name

Popular brands

Honda 2004 RSX, Owner'S Manual

Search results

Summary of Contents for 2004 RSX

Reviews:

Related manuals for 2004 RSX

Brands by name

Popular brands