©2003 American Honda Motor Co., Inc. - All Rights Reserved
5
6. Install the front fender.
CAUTION: Be extremely careful when loosening the
pinch bolts and removing the axle shaft as the
motorcycle will lose stability and can cause damage or
fall on you.
Loosen the two right axle pinch bolts.
Remove the axle bolt.
Loosen the two left axle pinch bolts.
Remove the axle protective covering and axle shaft.
Position the reflector stays on the inside of the front
fender by aligning them with the projections on the
front fender. Install the reflector stays with two 6 x 20
mm pan head screws and rubber washers.
Secure the reflectors to the stays with two 6 mm nuts.
Position the front fender between the fork legs and
attach it to the fork stays with two 6 x 18 mm socket
bolts. Secure the brake hose stays with two 6 x 16 mm
flange bolts.
Torque the bolts.
Torque:
9 ft-lbs (1.2 kg-m, 12 N
.
m)
PINCH BOLTS
AXLE
BOLT
AXLE SHAFT
FORK STAY UPPER
FORK STAY LOWER
6 X 16 MM
6 X 18 MM
6 X 20 MM
REFLECTOR
6MM NUT
REFLECTOR
STAY
PROTECTIVE COVERING
(DISCARD)
RUBBER WASHER
