With the child seat in the desired
seating position, route the belt
through the child seat according
to the seat maker’s instructions,
then insert the latch plate into the
buckle.
To activate the lockable retractor,
slowly pull the shoulder part of the
belt all the way out until it stops,
then let the belt feed back into the
retractor (you might hear a
clicking noise as the belt retracts).
After the belt has retracted, tug on
it. If the belt is locked, you will not
be able to pull it out. If you can pull
the belt out, it is not locked and
you will need to repeat these steps.
The lap/shoulder belts in the back
and front passenger seating positions
have a locking mechanism that must
be activated to secure a child seat.
The following pages provide
instructions on how to secure a
forward-facing child seat with this
type of seat belt.
1.
2.
3.
Child Seat Installation
Protecting Children
Driver and Passenger Saf ety
34
01/06/13 18:34:41 31S82640_037
If you have a child seat designed to
attach to the vehicle’s LATCH
anchorage system, follow the
instructions on page
39
.
Main Menu
Table of Contents
▲
▼