Service Station Procedures
3. Pull the support rod out of its clip
and insert the end into the hole on
the front of the hood around the
center.
To close the hood, lift it up slightly
to remove the support rod from
the hole. Put the support rod back
into its holding clip. Lower the
hood to about a foot (30 cm) above
the fender, then let it drop.
After closing the hood, make sure
it is securely latched.
Oil Check
Check the engine oil level every time
you fill the car with fuel. Wait a few
minutes after turning the engine off
before you check the oil.
1. Remove the dipstick (black
handle).
2. Wipe the dipstick with a clean
cloth or paper towel.
CONTINUED
Before Driving
DIPSTICK
Main Menu
Table of Contents
▲
▼
