Honda 1998 Odyssey Owner'S Manual Download Page 219

Page: 219 / 272

Compact Spare Tire

Your vehicle has a compact spare

tire that takes up less space. Use this
spare tire as a temporary replace-
ment only. Get your regular tire
repaired or replaced and put back on

your vehicle as soon as you can.

Check the inflation pressure of the
compact spare tire every time you
check the other tires. It should be
inflated to:
60 psi (420 kPa , 4.2 kgf/cm

)

Follow these precautions whenever
you are using the compact spare tire:

Do not exceed 50 mph (80 km/h)
under any circumstances.

This tire gives a harsher ride and

less traction on some road sur-
faces than the regular tire. Use
greater caution while driving on
this tire.

Do not mount snow chains on the
compact spare.

The wheel of the compact spare

tire is designed especially to fit
your vehicle. Do not use your
spare tire on another vehicle
unless it is the same make and
model.

INDICATOR LOCATION MARK

The compact spare tire has a shorter
tread life than a regular tire. Replace
it when you can see the tread wear
indicator bars. The replacement

should be the same size and design

tire, mounted on the same wheel.

The compact spare tire is not

designed to be mounted on a regular

wheel, and the compact wheel is not

designed for mounting a regular tire.

Taking Care of the Unexpected

TREAD WEAR INDICATOR BAR

Main Menu

Table of Contents

▲

▼

Summary of Contents for 1998 Odyssey

















































































































































































































































































Search results

Summary of Contents for 1998 Odyssey

Reviews:

Related manuals for 1998 Odyssey

Brands by name

Popular brands

Honda 1998 Odyssey, Owner'S Manual

Search results

Summary of Contents for 1998 Odyssey

Reviews:

Related manuals for 1998 Odyssey

Brands by name

Popular brands