Child Safety
Second Seat Installation:
There are three attachment points
available for the seven-passenger
model, and two attachment points
available for the six-passenger model.
To use a tether-style child seat in the
second seat, the third seat must be
stored in the floor recess (see page
60
). You will find a U-shaped slit in
the carpeting at each attachment
point. Select the attachment point
you want to use, and pull up the
carpeting at the slit. Attach the
tether strap to the mounting hook
and make sure it is secure.
Important Safety Information
Keep the third seat in the floor while
using a tether-style child seat in the
second seat. If you attempt to return
the third seat to the upright position,
you may damage the vehicle or
tether, even though the damage may
not be obvious. If this happens, the
child seat may not be properly
restrained in a crash.
Third Seat Installation:
There are two attachment points on
the tailgate sill. Select the attach-
ment point you want use, and
remove the plug with a small flat-
tipped screwdriver or a fingernail file.
Install the tether hardware that came
with the child seat.
Tighten the bolt to:
16 lbf.ft (2.2 kgf.m , 22 N.m)
If you are not sure how to install the
hardware, have it installed by your
authorized Honda dealer.
The anchor plate and mounting
hardware for a top tether are
supplied with the car. When install-
ing, make sure the toothed washer is
on the bottom of the bolt.
TOOTHED WASHER
The supplied anchor plate is
designed only for mounting a child
restraint. Do not use it for any other
purpose.
Storing a Child Seat
When you are not using an infant
seat or other child restraint, either
remove it or make sure it is properly
secured so it cannot be thrown
around the car during a crash.
Driver and Passenger Safety
Main Menu
Table of Contents
▲
▼