Honda 1995 Accord Wagon, Owner'S Manual

Page: 117 / 197

Cooling System
drain bolt from the engine
block. 4. Remove the reserve tank
from its holder by pulling it
straight up. Drain the
coolant, and then put the
tank back in its holder.
5. When the coolant stops
draining, tighten the drain
plug in the bottom of the
radiator. Apply non-hardening
sealant to the drain bolt
threads, and reinstall the bolt
in the engine block. Tighten
the bolt to 61 Ib-ft (8.5 kg-m,
83 N.m).
6. Mix the recommended
antifreeze with an equal
amount of purified or
distilled water in a clean
container. The cooling
system capacity is:
With 5-speed manual
transmission:
5.7 U.S. qt (5.4 , 4.8 Imp qt)
With automatic transmission:
5.6 U.S. qt (5.3 , 4.7 Imp qt)
Maintenance
continued
RESERVE TANK
HOLDER RESERVE TANK CAP