Cooling System
1. Start the engine. Slide the heater
temperature control lever to
maximum heat and turn off the
engine. Open the hood. Make
sure the engine and radiator are
cool to the touch.
2. Remove the radiator cap.
3. Loosen the drain plug on the
bottom of the radiator. T h e
coolant w i l l drain t h r o u g h the
splash guard. Remove the drain
bolt f r o m the engine block.
4. Remove the reserve tank from
its holder by pulling it straight up.
Drain the coolant, then put the
tank back in its holder.
5. When the coolant stops draining,
tighten the drain plug in the
bottom of the radiator. Apply
non-hardening sealant to the
drain bolt threads and reinstall
the bolt in the engine block.
Tighten it securely.
Maintenance
CONTINUED
DRAIN
PLUG
DRAIN
BOLT
RESERVE TANK
RESERVE
TANK CAP
HOLDER
Table of Contents
Main Menu
▲
▼
