© 2016 American Honda Motor Co., Inc - All Rights Reserved.
3 of 3
0SP36-HL5-201, 0SP36-HL3-202, 0SP36-HL4-202
2. Repeat Step 1 for #2 compression strap. Try to keep
the same tension on both the left and right sides of
the cover.
3. Take the #3 strap and pass it under the vehicle to the
opposite side.
#3 STRAP
4. From the driver’s side, take the metal ring with the
three cam buckles and, choosing any of the buckles,
push the tab and insert the #1 compression strap
through the back and under the tab. Pull loosely.
METAL RING
5. Repeat Step 4 for the #2 strap, then the #3 strap
until all three compression straps are loosely routed
through each cam buckle.
6. Start with the #3 strap that passes under the vehicle
and pull with moderate pressure but not too tight.
Pull the remaining straps moderately tight.
7. Check to make sure that the ring on the driver’s side
is not below the bottom hem of the cover.
1
2
BOTTOM HEM
RING
8. Slowly pull each strap tight making sure each is even
and secure.
9. If necessary, excess strap can be tied off to minimize
flapping while towing.
<EXCESS STRAPS TIED OFF>
#2 STRAP
#1 LOOP
OO
O
O
O
O
O
O
P
