© 2010 American Honda Motor Co., Inc. - All Rights Reserved.
AII 44382 (1008)
5 of 9
19. Remove the wheel sensor and O-ring from the
knuckle. Do not disconnect the wheel sensor
connector.
•
Remove the trunk lip weatherstrip near the
trunk rear trim panel. Detach the clips, and
release the hooks by pulling the trunk rear trim
panel up, then remove it.
18. Position the floor jack at the connecting point of
the trailing arm and the knuckle. Raise the floor
jack until the suspension begins to compress.
Remove the flange bolt from the bottom of the
damper.
FLANGE
BOLT
TRAILING
ARM
KNUCKLE
BOLT
WHEEL
SENSOR
O-RING
KNUCKLE
MOUNTING
BRACKET
TRIM
PANEL
HOOKS
CLIPS
•
Remove the trunk right side trim panel the
same way.
TRIM
PANEL
CLIP
TRIM
PANEL
SEAT-BACK
RELEASE
CABLE
SLIT
•
Remove the clips, then remove the trunk left
side trim panel from the trunk. Release the
rear seat-back release cable out through the
slit in the trim panel.
WEATHERSTRIP
20. Remove the brake hose mounting bracket.
CLIPS
