PRELIMINARY
6 of 10
AII 37566 (0709)
© 2007 American Honda Motor Co., Inc. – All Rights Reserved.
20. Plug in each fog light harness connector, and
reinstall the front bumper.
NOTE: Have an assistant help you to install the front
bumper.
771018AB
FRONT
BUMPER
FOG LIGHT HARNESS
CONNECTOR
LEFT
FOG LIGHT
RIGHT
FOG LIGHT
FOG LIGHT HARNESS
CONNECTOR
Installing the Light/Turn Signal Switch
21. Lower the tilt lever and pull the steering wheel out.
22. Remove the upper steering column cover:
•
Insert a flat-tip screwdriver along the column
guide inside the lower cover, and gently pry out
the retaining tab of the upper column cover.
•
Push the lower cover in at the areas shown to
release the two retaining tabs, and pull up on the
upper cover to release the two hooks.
6608050T
TILT LEVER
2 RETAINING TABS
Push.
FLAT-TIP
SCREWDRIVER
RETAINING
TAB
2 HOOKS
UPPER
STEERING
COLUMN
COVER
LOWER
STEERING
COLUMN
COVER
COLUMN
GUIDE
