PRELIMINARY
2 of 10
AII 37566 (0709)
© 2007 American Honda Motor Co., Inc. – All Rights Reserved.
Illustration of the Fog Lights Installed on the Vehicle
INSTALLATION
1.
Make sure you have the anti-theft codes for the
audio and navigation system (if equipped), and write
down the radio station presets.
2.
Disconnect the negative cable from the battery.
3.
Remove the front bulkhead cover (seven clips).
Customer Information:
The information in this
installation instruction is intended for use only by skilled
technicians who have the proper tools, equipment, and
training to correctly and safely add equipment to your
vehicle. These procedures should not be attempted by
“do-it-yourselfers.”
740220AY
FOG
LIGHT
HARNESS
FOG LIGHT
HARNESS
LEFT
FOG LIGHT
RIGHT
FOG LIGHT
LIGHT/TURN
SIGNAL
SWITCH
742306BE
FRONT BUMPER
FRONT
BULKHEAD
COVER
7 CLIPS
4.
Remove the front bumper (two self-tapping screws
and 10 clips).
•
Have an assistant help you when removing the
front bumper.
5.
Remove the three self-tapping screws from the front
bumper, and remove the left fog light cover.
6.
Repeat step 5 to remove the right fog light cover.
742307AE
FRONT
BUMPER
10 CLIPS
2 SELF-TAPPING
SCREWS
732003AY
3 SELF-TAPPING
SCREWS
(Reuse.)
COVER
