© 2012 Honda Motor Co., Ltd. - All Rights Reserved.
2 of 2
87963-MGS-A500
Drive the pin of the push rivet using a drift and plastic
hammer.
3. Loosely install the right saddlebag panel as shown.
7. Attach the right emblem in the position shown.
RIGHt EMbLEM
Remove the adhesive
backing before attaching.
8. Repeat steps 1 through 7 on the left side.
ISOPROPYL ALCOHOL
Thoroughly clean the area where the
right saddlebag panel will be attached.
RIGHt
SADDLEbAG
RIGHt
SADDLEbAG
RIGHt
SADDLEbAG
RIGHt
SADDLEbAG
PANEL
ADHESIVE bACKINGS
Pull out while pressing on the right saddlebag panel.
ADHESIVE bACKINGS
Pull out while
pressing on the right
saddlebag panel.
ADHESIVE bACKINGS
Pull out while pressing on the
right saddlebag panel.
(. Install the right saddlebag panel securely as shown.
5. Apply adequate pressure to the attached right
saddlebag panel.
RIGHt
SADDLEbAG
PANEL
RIGHt SADDLEbAG
PANEL
RIGHt SADDLEbAG
PANEL
ADHESIVE bACKINGS
Pull out while pressing on the
right saddlebag panel.
6. Secure the saddlebag panel with the push rivet as
shown.
PuSH RIVEt
Insert.
PIN
Drive.
DRIFt
ISOPROPYL ALCOHOL
Thoroughly clean the area where
the right emblem will be attached.
