© 1999 American Honda Motor Co., Inc - All Rights Reserved.
AII 20680 (9908)
1 of 3
INSTALLATION
INSTRUCTIONS
08F20-S0X-1001-91
Accessory
Application
Publications No.
Issue Date
AUG 1999
GOLD EMBLEM KIT
P/N 08F20-S0X-100
ODYSSEY
PARTS LIST
Front “H” emblem
Rear “H” emblem
Rear “ODYSSEY”
emblem
2 Push nuts
TOOLS AND SUPPLIES REQUIRED
Installing the Front “H” Emblem
1.
Open the hood, and remove the bulkhead cover
(11 expansion clips).
2.
Remove the front grille by pulling it toward you (3
expansion clips and 14 retaining tabs). Take care
not to damage the retaining tabs.
EXPANSION CLIP
BULKHEAD
COVER
EXPANSION
CLIPS
FRONT
GRILLE
RETAINING
TAB
AII 20680
Y0540-D
Phillips screwdriver
Flat-tip screwdriver
Diagonal cutters
Contact cleaner
Shop towel
String
Masking tape
INSTALLATION
NOTE:
•
Be careful not to damage the body finish when you
remove and install the emblems.
•
This emblem kit should be installed only when the
ambient air temperature is 60°F (15°C) or above.
•
To allow the adhesive to cure, do not wash the
vehicle for 24 hours.
