© 2013 American Honda Motor Co., Inc. – All Rights Reserved.
AII 50024-50373 (1308)
23 of 25
8.
The following message will display:
Obtain PCM-
code (IMMOBILIZER PCM CODE) from iN. The
vehicle’s VIN will be required to obtain a
password. (USA)
Click the check button.
QB32106AH
“Obtain PCM-code”
message.
CHECK BUTTON
9.
Input the PCM code, then click the check button.
NOTE: To ensure security, the PCM code
(password) is changed every day, so it is impossible
to register the remote control engine starter if the
dates of the PCM code acquisition and registration
are different. The date on the HDS/MVCI tester
should also be the same.
QB32107BH
Input the PCM-Code.
CHECK BUTTON
10. The following message will display:
The
registration of the Remote Control Engine Starter
Unit has been completed.
Turn the ignition off.
QB32108CH
“The registration of the
Remote Control Engine
Starter Unit has been
completed.”
11.
The following message will display:
Check that
engine can be started by the Transmitter.
Click
the check button.
QB32109CH
“Check that engine can be
started by the Transmitter.”
CHECK BUTTON
12. Perform the Check the operation of the Remote
Control Engine Starter, then disconnect the HDS/
MVCI.
