© 2002 American Honda Motor Co., Inc - All Rights Reserved.
AII 24665 (0210)
1 of 6
INSTALLATION
INSTRUCTIONS
Accessory
Application
Publications No.
Issue Date
OCT 2002
08E49-S9A-1000-91
2003 CR-V
SECURITY SYSTEM
HOOD SWITCH
P/N 08E49-S9A-100
PARTS LIST
Hood switch harness
Hood switch
Cable clip
Illustration of the Hood Switch Installed on the
Vehicle
13 Wire ties
TOOL AND SUPPLIES REQUIRED
#2 Phillips screwdriver
Small flat-tip screwdriver
Felt-tip pen
10 mm Combination wrench
10 mm Socket
Ratchet
Torx wrench
Isopropyl alcohol
Shop towel
Harness bracket
(Not used if equipped
with fog lights)
INSTALLATION
2 Wire ties with clips
HOOD SWITCH
SECURITY UNIT
HOOD SWITCH
HARNESS
DRIVER’S
DASHBOARD
UNDER
COVER
RETAINING
TAB
KNOB
AII 24665
Customer Information:
The information in this
installation instruction is intended for use only by
skilled technicians who have the proper tools,
equipment, and training to correctly and safely add
equipment to your vehicle. These procedures should
not be attempted by “do-it-yourselfers.”
1.
Make sure you have the anti-theft code for the
radio, then write down the frequencies for the
preset buttons.
2.
Disconnect the negative cable from the battery.
3.
Turn the knob clockwise, release the one
retaining tab, and remove the driver’s dashboard
under cover.