6 of 14
AII 25886 (0308)
© 2003 American Honda Motor Co., Inc - All Rights Reserved.
14. Fit the DIN bezel around the display module
pocket. Set the heater control unit on the display
module pocket, and reinstall the left and right
vehicle brackets using the two self-tapping screws
removed in step 9. Attach the display module to
brackets with three self-tapping screws supplied
with the XM radio attachment kit.
Routing the XM Radio Harness
15. Remove the driver’s seat front cover (four clips).
16. Remove the driver's seat rear cover (four clips).
Take care not to damage the clips.
CLIPS (4)
DRIVER’S
SEAT FRONT
COVER
DRIVER’S
SEAT
17. Remove the drivers seat (four bolts). Move the
driver seat out of the way.
DRIVER’S SEAT
BOLTS (4)
DRIVER’S SEAT
REAR COVER
CLIPS (4)
DRIVER’S SEAT
HEATER
CONTROL
UNIT
3121051M
SELF-
TAPPING
SCREW
(Reuse.)
RIGHT
VEHICLE
BRACKET
LEFT
VEHICLE
BRACKET
SELF-TAPPING
SCREWS
(Supplied with
XM radio
attachment kit)
SELF-TAPPING
SCREWS
(Supplied with
XM radio
attachment
kit)
SELF-
TAPPING
SCREW
(Reuse.)
DISPLAY
MODULE
POCKET
DIN
BEZEL