2 of 3
All 20000 (9809)
1998 American Honda Motor Co., Inc - All Rights Reserved.
4.
Attach a piece of masking tape onto the console
panel below the clock.
7.
Remove the radio/pocket assembly (four radio
mounting bolts, and unplug the radio connector and
the antenna lead).
5.
Using a flat-tip screwdriver wrapped with a shop
towel, gently pry up on the clock to release the clips;
then disconnect the connectors and remove the
clock.
6.
Remove the console panel (three self-tapping
screws, five retaining clips two retaining tabs, and
two connectors).
8.
Remove the left and right radio brackets from the
radio/pocket assembly (four bolts and two self-
tapping screws). Discard the pocket and the two
self-tapping screws.
CLOCK
MASKING
TAPE
SHOP TOWEL
CONNECTORS
RADIO
RADIO
MOUNTING
BOLT (Reuse.)
RADIO
CONNECTOR
ANTENNA
LEAD
CLIP
CONSOLE
PANEL
CONNECTORS
RETAINING
TAB
SELF-
TAPPING
SCREWS
RETAINING
TAB
SCREWS
(Reuse.)
SELF-
TAPPING
SCREW
(Discard.)
RIGHT
RADIO
BRACKET
(Reuse.)
SELF-
TAPPING
SCREW
(Discard.)
SCREWS
(Reuse.)
LEFT
RADIO
BRACKET
(Reuse.)
POCKET
(Discard.)
