© 2015 American Honda Motor Co., Inc. – All Rights Reserved.
AII01913-51 (1507)
3 of 3
6.
Secure the ATF cooler with the three 6 x 20 mm
washer bolts to the front bulk head and the center
mount support bracket.
CENTER MOUNT
SUPPORT BRACKET
FRONT SUBFRAME
7.
Install the ATF pipe assembly bracket to the
vehicle’s frame with the 6 x 12 mm flange bolt.
ATF PIPE
ASSEMBLY
CLAMPS
ATF COOLER
ASSEMBLY HOSES
Connect to ATF
pipe assembly.
8.
Remove the ATF filter hose and discard it. Then
connect the upper ATF assembly hose to the ATF
pipe, and the lower ATF assembly hose to the ATF
filter as shown.
ATF PIPE
ATF
FILTER
ATF FILTER
HOSE
Do not reuse.
ATF PIPE
ASSEMBLY HOSES
Connect to transmission.
TRANSMISSION
CLAMP
CLAMP
9.
Install all removed parts.
10. Inspect the ATF fluid and adjust as required.
11. Install the hang-tag around the rear view mirror.
