Honda Automobiles 2009 Civic Hybrid, Owner'S Manual

Page: 317 / 384

Examine the new wiper blades. If
they have no plastic or metal
reinforcement along the back
edge, remove the metal
reinforcement strips from the old
wiper blade, and install them in
the slots along the edge of the new
blade.
Make sure the three rubber tabs
inside the blade fit to each notch of
the reinforcement, as shown.
Place the top of the wiper blade on
the end of the blade assembly, and
slide the blade onto the assembly
in the direction pointed to by the
arrow.
Make sure the tab on the blade
assembly fits in the indent of the
wiper blade and the blade is
completely installed.
Slide the wiper blade assembly
onto the wiper arm. Make sure it
locks in place.
Make sure the blade is completely
installed and that its edge is not
bunched up.
Lower the wiper arm down against
the windshield, the passenger’s
side first, then the driver’s side.
4.
5.
6.
7.
8.
Wiper Blades
314
TOP
REINFORCEMENT
BLADE
TAB
INDENT
０８／０７／１９ １０：０９：１９ ３１ＳＮＣ６３０ ０３１９
2009 Civic Hybrid