HomingGame Best Game Machine Manufacturer
www.hominggame.com
|
www.game-made-in-china.com
|
4
5
Remove the right grip. Be careful when removing the grip
as the pieces inside may come free.
When disassembling and cleaning individual parts, be care-
ful of the direction you attach the trigger bumper. Attaching
it in the wrong direction may lead to a malfunction in the
operation of the trigger.
10
TRIGGER BUMPER
FIG. 10-4c
FIG. 10-4d
The microswitch is slotted into the left grip. Remove it
gently, being careful not to damage the wires.
MIRCOSWITCH
601-11823
FIG. 10-4e
6
7
wire using the nippers or cutters.
The wire attached to the microswitch will be used with the replacement microswitch. Remove the old heat shrink tubing attached to the
Use the soldering iron to remove the wire soldered to the microswitch terminal. Pass the wire through each of the heat shrink tubes.
8
Solder the wire to the terminal on the replacement microswitch. Use the wiring diagram to make sure you don’t solder in the wrong
place.
9
Use the industrial dryer to apply heat and attach the heat shrink tubing to the soldered area. Insert the microswitch into the left grip and
attach it.
10
11
Reattach the right grip, taking care not to pinch the wire. Replace the two tamperproof screws, screw and nut to fix it in place. Be care-
ful not to tighten the screws too tightly.
Reattach the Control Unit to the cabinet. Turn on the power and use the input test screen in GAME TEST Mode to check the operation
of the trigger.
36
