1.
Lay the remote control face-down on a table and hold it down with your left hand.
2.
Insert the thumbnail of your right hand into the
Release Tab
, and your index fingernail into the
Pull-
Groove
.
3.
With your thumbnail, squeeze the
Release Tab
inwards whilst at the same time sliding the battery
holder out with your index fingernail.
CLEANING AND MAINTENANCE
Caution:
•
Always switch off and unplug the unit before removing the filters or performing any cleaning.
•
Do not use harsh detergents, chemical cleaners or solvents as they may damage the surface finish of
the plastic components.
MAIN BODY
1.
Use a soft duster or a rag to dust off all the surfaces.
2.
Clean the Air Inlet and Air Outlet using a vacuum cleaner regularly.
3.
Wipe all the parts with a soft damp (not wet) cloth dipped in mild soapy water.
Caution:
Ensure that water doesn’t get
inside the unit.
4.
Use a dry cloth to thoroughly dry the unit before turning on.
AIR INLET COVER AND INNER FILTER
1.
Use a screwdriver to unscrew the two cover screws.
2.
Remove the Air Inlet Cover and wipe clean, or clean using a vacuum cleaner.
3.
Use a duster to gently dust off the Inner Filter.
4.
Replace the Inner Filter and Air Inlet Cover and tighten the screws to fix it in position.
