Assembly Instructions
2
IMPORTANT
* Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Do not tighten up all the head cap bolts and screws until each part is properly assembled.
* Use a soft cloth between these parts and the fl oor.
* After assembly item must be level to work properly. Use the included adjustable levelers to level.
STEP 1
Insert Cam Lock Screws into the pre-drilled holes of Top (A), (N), Bottom (D)
and Side Panel (E), (F), (P), (Q).
(See Figure 1)
A
D
E
N
P
Q
F
Figure 1
/5
Cam Lock Screw
