Assembly Instructions 2/3
Flat Washer
Spring Washer
Head Cap Bolt
Figure 1
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
Keep Hex Wrench as the bolts may need to be tightened in the future.
Drawer Stop
STEP 2
Remove drawer from Cabinet (A).
Rotate drawer stop into position.
(See Figure 2)
STEP 1
Attach Stretchers (B) and Shelf (D) to Side Frames (C) with Flat Washers,
Spring Washers and Head Cap Bolts, tightening bolts only halfway.
(See Figure 1)
Tighten all bolts.
Figure 2
A
B
B
C
C
D
