Assembly Instructions 2/7
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
Keep Hex Wrench as the bolts may need to be tightened in the future.
E
Head Cap Bolt
B
F
Head Cap Bolt
Figure 1
D
STEP 2
Attach Divider (F) to unit
with Head Cap Bolt,
tightening bolt only halfway.
Attach Front Rail (D) to unit
with Head Cap Bolts,
tightening bolts only halfway.
STEP 1
Attach Back Panel (E) to Side Panel (B)
with Head Cap Bolts tightening bolts
,
only halfway. (See Figure 1)
