Assembly Instructions 2/2
IMPORTANT
* Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Do not tighten up all the bolts until each part is properly assembled.
* Use a soft cloth between these parts and the floor.
A
B
C
E
F
G
STEP 1
Attach Legs (B) and (C) to Seat (A) with
Flat Washers, Spring Washers and
Head Cap Bolts. (See Figure 1)
Tighten
olts only half way.
all Head Cap B
Attach Front Stretcher (G) to unit with
Wood Screws. (See Figure 2)
Attach Side Stretcher (E) to Leg (B) and
Side Stretcher (F) to Leg (C) with Wood Screws.
(See Figure 2)
Figure 2
Figure 1
Wood Screw
Head Cap Bolt
Spring Washer
Flat Washer
STEP 2
Attach Back Frame (D) to unit with Flat Washers,
Spring Washers, Head Cap Bolts (short),
Head Cap Bolts (long) and Wood Screws.
(See Figure 3 and Figure 4)
Tighten all Head Cap Bolts.
D
Head Cap Bolt (short)
Spring Washer
Flat Washer
Wood Screw
Figure 3
Head Cap Bolt (short)
Spring Washer
Flat Washer
Figure 4
Head Cap Bolt (long)
Spring Washer
Flat Washer
