Assembly Instructions 2/3
IMPORTANT
* Please keep Key Wrench and Hex Wrench in a safe place as you may need to tighten up the Nuts in the future.
* Use a soft cloth between these parts and the floor.
* Do not use power tools to assemble and do not over tighten the bolts and nuts.
* Do not tighten all the bolts and nuts until each part is properly assembled.
Figure 1
STEP 1
Attach Seat (A) and Back (B) to Frame (C) with
Flat Washers, Spring Washers and Head Cap Bolts,
tightening the bolts only half way. (See Figure 1)
STEP 2
Attach Frame (D) to unit with
Flat Washers, Spring Washers
and Head Cap Bolts, tightening
the bolts only half way.
Tighten all Head Cap Bolts
used in Steps 1 and 2.
STEP 3
Attach Connector (G) to unit with Bolts, Flat Washers, Spring Washers (large) and Nuts.
(See Figure 2)
G
Bolt
Flat Washer
Flat Washer
Spring Washer (large)
Nut
Figure 2
A
B
C
Flat Washer
Head Cap Bolt
Spring Washer
Flat Washer
Head Cap Bolt
D
Spring Washer
